Industry warning: export lamps should correctly identify the protection class

Recently, the Ningbo Electrical Safety Inspection Center (Yuyao) laboratory found during the test that the two lamps with identical structures have different detection results due to their different protection level markings. The overall protection rating of the first luminaire is identified as IP66, but because the electrical configuration cavity cannot pass the waterproof test, the product is unqualified; and when another luminaire is identified, the protection rating of the luminaire is divided into two parts, where the light source cavity For IP66, the electrical configuration cavity is IP44, which passes the dust and water proof test.

It is understood that in accordance with the safety standards for street lamps IEC60598-2-3, the enclosure protection rating of all lamps shall be at least IPX3, and the side-opening external parts of the tunnel lighting fixtures and column composite luminaires shall have at least IPX5. At the same time, the luminaire allows different levels of protection for different components. Since the first lighting manufacturer did not correctly understand the requirements of the standard, some of the devices had too high a protection level marking, which led to the failure of the product to pass the relevant requirements for waterproof testing.

Here, the inspection and quarantine department reminds street lamp production enterprises that they must familiarize themselves with safety standards and strictly follow the standards for production; strengthen communication with customers, and have special understanding of the special requirements for products put forward by customers, and be correct in accordance with standards and customer requirements. Reasonably identify the protection level; to standardize production, strictly control the quality of materials.

Very solid Take-apart Reel, particularly indicated for a continuous use in time. It is

fully turned on the winding surfaces (barrel and inner flange) and on the flange ring.

The available sizes are as per DIN 46395 specifications or as indicated by the

Customer, for a normal use up to 1800 mm of flange diameter. It is supplied CE

marked, with an instruction and maintenance manual. Indicated for metallic wire.

To be used for high speed processing on a wiredrawing machine or for coil transfer.

It is supplied with the following alternative closing / dismounting options:

- central screw with a dead hole and safety lock

- central ring with a central feed-through hole and safety lock

- 3-side screws with central feed-through hole

- 4-side screws with central feed-through hole

- pneumatic operation and safety lock

- oil-pressure operation and safety lock




Available on request:


- dynamic balancing for speeds up to 50 m/s

- slots for the coil strapping in 3, 4, 6 or 8 positions

- arrangement for use with a cardboard tube

- size compatible for Z2, Z3 and Z4 coils

- false flange and adapters on the drum to reduce the traverse width

- vice for wire locking with automatic unlocking when the reel is dismounted

- cone-shaped drum

- cone-shaped drum for lifting and transferring the coil

- plastic / polyethylene / carpet / ... lining

- painting


collapsible reel coiling lifting system

Collapsible Reel

Collapsible Cable Reel, Take Up Reel, Collapsible Cable Coiler, Take-apart Reel, Screw Collapsible Reels

NINGBO BEILUN TIAOYUE MACHINE CO., LTD. , https://www.spool-manufacturer.com

This entry was posted in on