The Wuhan Industrial and Commercial Department recently conducted a product quality inspection on the large-scale lighting market in Wuhan. The results showed that only 6 of the 16 batches of lamps that were sampled were qualified, and the pass rate was only 37.5%.
According to reports, the main problems of unqualified lamps include: the cable fixing part of the lamp is not installed with the wire fixing frame, which may cause the wire to be pulled off to make the protection against electric shock, or cause other abnormalities of the lamp to become unsafe; the internal terminal Not tight enough, the relevant accessories are not good enough, affecting the lamp's service life and power consumption; not indicating the rated voltage and frequency.
In this market interview, the reporter found that many consumers buy lamps that only pay attention to good, not enough artistic sense, and whether the decoration style is matched, etc., but the quality of the lamps is neglected. The lighting operator Liu Shifu told reporters that the current plagiarism in the lighting market is serious. Some small enterprises have seized the consumer's attitude of looking at the appearance and shape, and arbitrarily copied the famous brand lamps. Although the two are similar in appearance, they are in the process, material selection and quality. The disparity is great.
Wuhan Industrial and Commercial Department also reminds consumers: Buying lamps can't just look at the appearance, you have to go to the regular store to buy, at the same time, you must see if the lamp identification is complete, whether there is 3C certification mark, whether the charged body is exposed, and check the lamp inspection report to prevent electric shock Compliance is checked for items such as protection, durability tests, and resistance to combustion.
According to the results of the sampling, the Wuhan Industrial and Commercial Department has ordered all the unqualified products to be removed.
Domestic communication, 4 g module in addition to support two kinds of LTE FDD LTE/TD - LTE standard, also compatible with 2 g / 3 g down, support td-scdma/WCDMA/EDGE/GP/GSM/CDMA1X/EVDO mode. The data service downstream rate can reach up to 100Mbps, the uplink rate can reach up to 50Mbps, providing customers with high-speed Internet access and wireless data connection and other functions. In addition to providing high-speed data access, it also provides voice, SMS, communication book and other functions, which can be widely used in notebook, tablet, touch screen communication devices, smart phones, video surveillance, multimedia mobile phones and vehicle equipment and other terminal products and vertical applications. Today, I will introduce you to what is 4G module and how to use 4G module.
What is 4G module
4G module said TD-LTE and FDD-LTE and other LTE network standards are collectively referred to. It has the characteristics of fast communication speed, wide network spectrum and flexible communication. 4G module refers to a product whose hardware is loaded to the specified frequency band, software supports the standard LTE protocol, and software and hardware are highly integrated and modular. The hardware integrates radio frequency and baseband on a small PCB board to complete wireless receiving, transmitting and baseband signal processing functions. The software supports voice dialing, SMS sending and receiving, dial-up networking and other functions.
Second, how to use 4G module
The 4G module is usually inserted into the circuit board or the patch module is welded to the circuit board, and the corresponding SIM card is inserted, and the network is connected through the 4G cellular network. In the common transparent transmission mode, data can be directly sent to the target server through the 4G module, and the 4G module can receive data from the server at the same time, and send the data to the serial port, which is received by the serial port device connected to the 4G module. Users do not need to pay special attention to the data conversion process between serial port data and network data packets, only need to insert the module to the target position, simple connection and parameter setting, you can achieve transparent transmission between the serial port and the network end.
What is the 4G module How does the 4G module work
4G module, also known as 4G transmission module, 4G communication module, 4G LTE module. It is a kind of hardware loaded to the specified frequency band, the software supports the standard LTE protocol, and the software and hardware are highly integrated modular products, with good compatibility, fast communication speed, large amount of communication data, wide network spectrum, communication flexibility and other characteristics, widely used in electric power, environmental protection, finance, industrial automation and other fields.
The working principle of 4G module
It has the characteristics of fast communication speed, wide network spectrum and flexible communication. The hardware integrates radio frequency and baseband on a small PCB board to complete wireless receiving, transmitting and baseband signal processing functions. The software supports voice dialing, SMS sending and receiving, dial-up networking and other functions.
Through high-speed networking, the 4G module transmits all terminal business data and equipment operating status to the business center in real time. Through the management monitoring platform, the terminal equipment operating status can be monitored in real time and equipment faults can be timely checked. The efficiency has been greatly improved in many aspects such as operating cost, operation scale and service timeliness. Suitable for shared massage chair, public charging pile, vending machine, vehicle system, environmental monitoring, power remote monitoring and other industries.
4G module refers to a product whose hardware is loaded to the specified frequency band, software supports the standard LTE protocol, and software and hardware are highly integrated and modular. It has the characteristics of fast communication speed, wide network spectrum and flexible communication. The hardware integrates radio frequency and baseband on a small PCB board to complete wireless receiving, transmitting and baseband signal processing functions. The software supports voice dialing, SMS sending and receiving, dial-up networking and other functions. Through high-speed networking, the 4G module transmits all terminal business data and equipment operating status to the business center in real time. Through the management monitoring platform, the terminal equipment operating status can be monitored in real time and equipment faults can be timely checked. The efficiency has been greatly improved in many aspects such as operating cost, operation scale and service timeliness.
Good compatibility
4G module supports FDD LTE/TD-LTE two LTE standards, can also be backward compatible with 2G/3G, support LTE-FDD, LET-TDD, WCDMA, TD-SCDMA, CDMA, GSM and other bands.
Large amount of communication data
4G module downstream rate can reach up to 150Mbps, uplink rate can reach up to 50Mbps, to provide customers with high-speed Internet access and wireless data connection and other functions, suitable for large data transmission applications, such as: remote video surveillance.
High communication speed
The 4G module has a lower ping value than the 2G/3G module, and it takes less time for the module to send data packets to receive the response from the server, which is suitable for applications requiring high response speed, such as remote alarm.
4G Module,4G Router Module,4G Wifi Module,4G Lte Wifi Module
Shenzhen MovingComm Technology Co., Ltd. , https://www.mcrouters.com