According to a Reuters report, China’s telecom equipment maker ZTE Corporation (ZTE) said that as China accelerates the establishment of the 5G network, the world’s largest fifth-generation mobile network, from this year’s Initially, the company’s R&D expenditure on 5G will double from its original level.
ZTE said that from this year onwards, an annual investment of 2 billion yuan (US$295.5 million) will be invested in 5G R&D, which is an increase compared to the investment of 1 billion yuan last year. The company said that investment is expected to increase further as boosting China's launch of 5G network in 2020.
China and the United States are competing to lead the development of 5G technology, and the network speed will be significantly higher than the current 4G. However, the 5G international standards have not yet been determined.
According to a forecast document compiled by the Ministry of Industry and Information Technology in a recent study, by 2025, China’s cumulative capital expenditure on 5G is expected to rise to 1.65 trillion yuan, and equipment manufacturers such as ZTE and Huawei Technologies will become the main beneficiaries. By.
Last week, China Mobile, China's largest state-owned telecommunications operator, conducted the first 5G site test in China in Guangzhou.
ZTE said that there are currently 3,000 employees working on 5G R&D, but a spokesman for the company declined to say whether it would increase the number of employees for R&D.
24 hours mechanical timer
Instant indicator
Min.setting time:15 minutes. Max.setting timer:24 hours
With hand switch,can be switched to operating and
setting at any time
Instructions:
1. Set program: 1 pin is equivalent to 15 minutes. Determine desired start time and push down pins until desired
off time.
For instance, if you want electrical devices to work from 8:00am to 11:00am and from 13:00pm to 17:00pm, you
just need to put down allthe pins between the three period time.
2. Set the current time: Turning the dial clockwise until the arrow pointing to
current time.
For example,if now it is 8:00 am, please turn the dial and make sure the
arrow point to 8. (See the picture.)
3. Plug the electrical device directly into the timer. Make sure the electrical
device is power-on.
4. Plug the timer into electrical outlet and the electrical device will be work
according to the setting program.
Note: = Normal Ope n = Timing
Make sure the switch on the Timing position. If it
is on the [Normal Open" mode, the electrical device is
always power-on and the timer function no work.
Specifications:
|
Rated Voltage, Current and Power |
As shown on the label |
|
Time Setting Range |
15minutes24hours |
|
Working Temperature |
-10℃?+55℃ |
|
Operation |
Clockwise |
|
Insulation Resistance |
>100M |
|
Inherent Loss |
≤1W |
Application:
1. To enable high-power electric appliances to run automatically at off-peak time if there is different electricity
price according to different periods of time in some areas.
2. To use for electric appliances which need time control, such as water heaters, air conditioners, drinking
fountains, rice cookers, advertising lights and so on.
3. To control the charging time. For example, battery of electric bikes or mobile phones, storage batteries, etc.
4. Occasions which need switch on/off frequently, like interval spray irrigation for flowersand lawn, cyclical
adding oxygen to fish jar, fountains and so on.
5. Home safety precautions and lighting.
Caution:
1.D o not exceed the maximum ratings of the timer.
2.M ust reset the current time after power failure.
3.D o not plug the timer directly into the working electrical appliances.
4.U nless changing the setting, keep the program same every day.
5.D o not disassemble timer by yourself. Professionals service are needed for maintenance.
6.T his item is only for indoor use.
Plug-in Mechanical Timer, Mechanical Timer Socket, 24hr Mechanical Timer, Mechanical Timer Plug, Mechanical Timer Adaptor, Mechanical Electric Timer Switch
NINGBO COWELL ELECTRONICS & TECHNOLOGY CO., LTD , https://www.cowellsockets.com