One, ALICAT gas mass flow controller product features
Complete stable control response in 1, 50 milliseconds
The precise, stable flow rate depends on the control response speed, and the Erikatо Mass Flow Controller reaches new settings within 50 milliseconds. Fast, repeatable and stable!
With reliable stability and responsiveness, the Ericcat® Mass Flow Controller is always a hit, making it the world's fastest mass flow controller! The use of Elicat's patented laminar flow differential pressure flow measurement technology combined with a high-speed proportional control valve allows you to reach the setpoint much faster than you look at.
2, easy to operate
50-100ms control response
Allows the user to adjust the PID to obtain the best speed and stability
Customized valve aperture to ensure full-scale flow stability
? The same device controls mass flow, volume flow, or absolute pressure
Instant start without warm-up: flow control can be started within 1 second
Second, ALICAT gas mass flow controller product series
MC standard series
The world’s fastest and most stable flow controller.
MCR high flow series
Precise control of large flow (50-3000 slpm) gases. The Eric Carter® R-Series valves are the world's only non-friction valves that precisely control the flow of large volumes of gas. The special hole pattern allows us to tailor the valve to your application needs.
MCW / MCRW low pressure loss series
Minimize the impact of pressure loss on the system, with a minimum full-scale pressure loss of only 4 mbar (0.06 psid); the Ericard® Whisper low-pressure loss mass flow controller controls pressures close to atmospheric pressure and is an analysis of aerospace and environmental gases. The perfect choice for applications such as; maximum range: 0-500 slpm. Click here to learn more about the Whisper series
MCS / MCRS corrosion resistant series
All ranges are available in 316L stainless steel construction for corrosive gases. Click here to learn more about Corrosion Resistant Series
MCE / MCV Special Series for Semiconductor Industry
Easily replace aging thermal flow controllers with any of the pin functions to make them compatible with your control system. Closed valve design is in line with semiconductor industry standards. The MCV Series also adds a rear pneumatic shut-off valve specifically for vacuum applications. Corresponding corrosion protection series MCES / MCVS can be customized. Maximum range: 0-20 slpm. Click here to learn more about the semiconductor industry-specific series
MCD / MCRD Bidirectional Mass Flow & Pressure Controller Series
The world's first bi-directional mass flow controller to control the gas flow forward or backward. Customizable low-pressure loss series MCDW series and corrosion-resistant MCDS series. Click here to learn more about Bidirectional Mass Flow & Pressure Controller Series
Three, ALICAT gas mass flow controller commonly used matching items
Rear valve, optimized for vacuum and back pressure applications
Batch control mode, relying on fast valve response to distribute the flow, included in the Totalizer (TOT) function
? CSA certification Class 1 Division 2 / ATEX certification Class 1 Division 2 allows equipment for hazardous environments
9-pin or 15-pin D-Sub connection interface optional
Communication modes are Modbus-RTU, RS-232, RS-485, PROFIBUS, etc.
Color backlit display for poor lighting conditions
Fourth, ALICAT gas mass flow controller performance parameters
index
Mass flow controller
Range
0.5SCCM, 1SCCM, 2SCCM, 5SCCM, 10SCCM, 50SCCM, 100SCCM....1500SLPM, 2000SLPM, 3000SLPM
Accuracy
±0.8% of reading ±0.2% of full scale (optional high accuracy: ±0.4% of reading ±0.2% of full scale)
Repeatability
±0.2%
Range ratio
200:1
Response time
100ms
Standard status (STP)
25°C & 14.696PSIA (101.325kPa)
temperature range
-10 to 50
Zero drift
0.02%
Range drift
0.02%
Humidity range
0-100%
Measuring flow range
128% (overflow rate)
Maximum pressure resistance
145psi
Output signal (digital)
Mass flow, volume flow, absolute pressure and temperature
Digital signal optional
RS485, Modbus, Profibus
Output signal (analog)
Mass flow, volume flow, absolute pressure and temperature
Analog signal optional
0-5VDC,1-5VDC,0-10VDC,4-20mA
Electrical connections
8-pin/9-pin/15-pin (depending on the type of flow meter)
Supply voltage
7-30VDC (4-20mA output: 15-30VDC)
Supply current
0.035A (4-20mA output: 0.055A)
APM variable power supply inherits the functional design and maintains the high power density characteristic.Standard communication interface includes RS232/RS485/USB/LAN,GPIB is optional.Users can choose the switch mode power supply that fits their testing requirements perfectly.
Some features as below:
- With accurate voltage and current measurement capability.
- Coded Knob, multifunctional keyboard.
- Standard RS232/RS485/USB/LAN communication interfaces, GPIB is optional.
- Remote sensing line voltage drop compensation.
- Equips with LIST waveform editing function.
- Use the Standard Commands for Programmable Instrumentation(SCPI) communication protocol.
- Have obtained CE certification.
150V DC Source System,High Current Power Supply,Apm Tech Power Supply,150V Dc Power Source
APM Technologies (Dongguan) Co., Ltd , https://www.apmpowersupply.com